Kenmore 795.51022.001 Service Manual page 111

17) Poor Cooling in Freezer section
NO. CHECKING FLOW
1) Turn Off the refrigerator.
2) Remove Grille Fan assembly, and check the
movement of Freezer Fan Motor manually, feel
the rotation condition, then proceed.
6
1) Remove Control Box in refrigerator sensor.
7
2) Check for any loose connection.
3) Turn On the refrigerator.
Remove the EPS duct carefully (without disconnect).
Look for damper baffle and check the movement by
entering to TEST MODE 1 (Press once) and TES
MODE 2 (Press once again).
8
Connector must be firmly connected, and wires don't be
have any damage.
Next action. Go to Step 8.
TEST MODE 1
TEST MODE 2
- 110 -
RESULT & SERVICE ACTION
Result
Replace Freezer Fan
Tight movement
Motor
Free movement
Go to Step 7
Result
Open Go to Step 10
TEST
MODE 1
Not works Go to Step 9
Go to Step 10
Close
TEST
MODE 2
Not works
Go to Step 9
TEST MODE 1 TEST MODE 2
Damper CLOSE
Damper OPEN
Service Action
Service Action