Rotor / Stator Removal - Briggs & Stratton CE8070 Troubleshooting Manual

This provides sufficient access to the generator unit for
troubleshooting, component replacement and overhaul
(Figure 14).
Figure 14 — Generator Unit Exposed
2
A view of the electrical components that are mounted on
the inside of the front case-half is provided in Figure 15.
Figure 15 — Electrical Components Mounted On Case
Hand-Held Series Generators • Familiarization & Troubleshooting Guide

Rotor / Stator Removal

•• Step 1:
• For easier access, position the unit as shown in
figure 16.
Figure 16 — Position For Rotor Removal / Inspection
•• Step 2:
Remove the cooling fan as shown. (Figure 17).
Figure 17 — Remove Cooling Fan
NOTE:
reassembly.
18
Disassembly • Section 2
Mark the face of the fan to ensure proper