One-Touch Timer Recording (Otr); Index Search - Sanyo FWZV475F Owner's Manual

One-touch Timer Recording (OTR)

This feature allows you to set the recording length simply
by pressing [REC] on the remote control.
Press [VCR] first.
1) Insert a recordable tape with an erase-protection
tab intact.
2) Select the recording mode using [REC MODE].
(Refer to "Note for DVD to VCR duplication" on
page 40 and "Recording" on page 81.)
3) Press [INPUT SELECT] to select the appropriate
external input position (L1/L2) to which your
external tuner is connected.
4) Press [REC] to begin the one-touch timer
recording.
You can select a fixed recording time by pressing
[REC] repeatedly.
(Normal recording)
(8:00)
When the one-touch timer recording is finished,
the unit will turn to the standby mode
automatically.
To change the recording length during the one-
touch timer recording:
Press [REC] repeatedly until the desired length
appear.
To cancel the one-touch timer recording within
the specified time:
Press [C].
Note
The remaining recording time will be displayed on the
•
front panel display during one-touch timer recording.
Press [DISPLAY] to see it on the TV screen.
You cannot pause the one-touch timer recording.
•
If VCR one-touch timer recording is completed during
•
DVD playback or recording, the VCR will be in stop mode
and the DVD keeps the current mode.
Unlike a timer recording, you can perform the following
•
operations during the one-touch timer recording.
- Turning the power to the standby mode to stop one-
touch timer recording.
- Using [REC] or [C] on the remote control.
When the one-touch timer recording is finished and the
•
power is in the standby mode, the unit will switch to the
timer standby mode automatically if a timer recording
has been programmed. Press [TIMER SET] to cancel
the timer standby mode for using the unit continuously.
This function is available only when the unit is connected
•
by the VIDEO OUT jack.
82 82 EN EN
VCR FUNCTIONS
(0:30) (1:00)
(7:30)

Index Search

An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that "INDEX SEARCH" menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
INDEX SEARCH
03
3) Press [E ], [ D] to start index search.
If you want to go in the forward direction, press [ D].
If you want to go in the reverse direction, press [E ].
After index search, the VCR will play back the cassette
tape automatically.
CURRENT PROGRAM
Beginning
of tape
Pro.1 Pro.2 Pro.3
02 01 01
Note
You can make the index mark up to 20.
•
This function is available only when the unit is connected
•
by the VIDEO OUT jack.
End
of tape
Pro.4 Pro.5
02 03
INDEX MARK