Satellite Link - Sanyo FWZV475F Owner's Manual

You can set the unit to start recording whenever it detects
the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
Satellite link accepts only the connection from L1 (rear)
•
with the external tuner. (The connection from L2 cannot
read any signals from the external tuner.)
The external tuner should be equipped with some kind
•
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner's manual on how to
set the timer.
Make sure to set the satellite link standby mode when
•
you finish setting.

SATELLITE LINK

1
2
3
4
5
6
7
Press [SETUP].
Use [K / L] to select "Timer
Programming", then press [OK].
Use [K / L] to select "Satellite Link",
then press [OK].
Timer Programming
Timer Programming
Satellite Link
Use [K / L] to select the time, media
and recording mode, then press [OK].
Satellite Link
DVD
Start Mode
VCR
5:00PM DVD SP
To Standby Mode
Use [K / L] to set the desired starting
time, then press [ B].
The hour can be selected from 1 to 12 with AM
•
or PM.
Repeat procedures in step 5 to set the desired
•
minutes.
If you wish to go back to the left, press [{].
•
Use [K / L] to select a recording media
("DVD" or "VCR"), then press [ B].
Use [K / L] to select the recording
mode.
Refer to page 27 for details.
Instructions continue on the next page.
EN EN 35 35