Hdmi - Sanyo FWZV475F Owner's Manual

HDMI

1
Press [SETUP] in stop mode and use [K /
L] to select "General Setting", then
press [OK].
2
Use [K / L] to select "HDMI", then
press [OK].
General Setting
Playback
Display
Video
Recording
Clock
HDMI
Reset All
You cannot select HDMI when an HDMI cable
•
is not connected and the items are shown in
grey color.
SETUPS
3
Use [K / L] to select a desired item, then
press [OK].
1
Format
2
HDMI Audio
3
RGB Range
4
When you finish with the setting, press
[SETUP] to exit.
1
Format (Default : RGB)
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [K / L] to select a setting, then press [OK].
When the connected device is not compatible with the
•
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
Your setting will be activated.
2
HDMI Audio (Default : ON)
If you do not want to output the audio through HDMI
(when you digitally output the audio through the COAXIAL
DIGITAL AUDIO OUT jack to your audio system, etc.), you
can set the HDMI audio output off.
Use [K / L] to select a setting, then press [OK].
Set to "OFF" when the HDMI sound is not output.
•
Your setting will be activated.
3
RGB Range (Default : Normal)
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [OK].
Select "Enhanced" if the black-white contrast is not
•
clear.
This setting is effective only for HDMI RGB output.
•
Your setting will be activated.
Format
RGB
YCbCr
HDMI Audio
ON
OFF
RGB Range
Normal
Enhanced
EN EN 79 79