Sanyo FWZV475F Owner's Manual page 32

4
Use [K / L / 0 / 1] or [the Number
buttons] to enter the start and end time,
then press [ B].
Date Start
JAN/30 12 : 00AM
L1/L2 REC To
L1 DVD
You cannot make a program which recording
•
time exceeds 12 hours.
5
Use [K / L] to select the appropriate
external input position (L1 / L2) to
which your external tuner is connected,
then press [ B].
Date Start
JAN/30 12 : 00AM
L1/L2 REC To
L1 DVD
6
Use [K / L] to select the recording
media ("DVD" or "VCR"), then press
[ B].
e.g.) recording to DVD
Date Start
JAN/30 12 : 00AM
REC To
L1/L2
DVD
L1
7
Use [K / L] to select a recording mode.
Date Start
JAN/30
12 : 00AM
L1/L2 REC To
L1 DVD
Refer to "Recording Mode" on page 27.
When recording to DVD, you can check the
•
remaining recordable space of the disc when
you select the recording mode.
Date Start
JAN/30 12 : 00AM
L1/L2 REC To
L1 DVD
Auto recording mode select (DVD only)...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available automatically
to complete recording the program.
Date
JAN/30
L1/L2
L1
"Auto" is only available for one program in the timer
•
program list.
The recording may be cut short when the available
•
recording space of the disc is too limited.
32 32 EN EN
TIMER RECORDING
End
- - : - -
Mode
SP
SP 2:00
End
1 : 00AM
Mode
SP
SP 1:00
End
1 : 00AM
Mode
SP
SP 1:00
End
1 : 00AM
Mode
SP
SP 1:00
End
1 : 00AM
Mode
SP
SP 1:00
Start End
12 : 00AM 1 : 00AM
REC To Mode
DVD Auto
Auto 1:00
8
Press [OK] when all items are entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer Standby mode.
Ensure the external source is tuned to
the correct channel.
When Timer set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the Standby mode.
Timer Programming
JAN/30/15 12:00 AM L1 SP
SP (1:00) THU JAN/29 11:00AM
Date Start
JAN/30 12:00AM 1:00AM
New Program
Your program setting is now stored.
To set another program, repeat steps 2 to 8.
•
To exit, press [TIMER] or [SETUP].
•
When 2 or more programs are overlapped,
•
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
•
"Checking, canceling or correcting the timer
programming information" on page 33.
9
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
CS DR
"VCR" will appear on the front panel display if
VCR timer recording have been set.
End L1/L2
L1
1/1
CD
HDD
DVD