Using The Title / Disc Menu; Pause - Sanyo FWZV475F Owner's Manual

Playing Back an Audio CD and a
CD-RW / -R with JPEG Files (cont'd)
Notes on JPEG:
After track is displayed for 5 seconds or 10 seconds (set
•
in "Slide Show" on page 53) the display moves to the
next track.
During JPEG playback, press [ B] or [{ ] to rotate a
picture 90 degrees clockwise or counterclockwise
respectively.
(Not available when the display menu appears.)
BASIC PLAYBACK

Using the Title / Disc Menu

DVD may contain a title list, which describes the contents
of the disc or a disc menu, which guides you through the
available functions in the disc.
Press [DVD] first.
1) Insert a playable disc (refer to page 24 on how
to insert a disc).
* Make sure the disc is compatible with this unit.
(Refer to page 44 for the list of compatible discs.)
2) Press [TOP MENU] or [DISC MENU] to call up the
title list or disc menu.
3) Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
4) Press [C] to exit.
Note
You can select a numbered menu with [the Number
•
buttons] also.
Menus vary among discs. Refer to the information
•
accompanying the disc for details.
[TOP MENU] or [DISC MENU] will not always be active
•
with all DVD.

Pause

1) During playback, press [F].
Playback will be paused and sound will be muted.
2) Press [ B] to return to the normal playback.
Note
On DVD, set "Still Mode" to "Field" in "Playback"
•
menu if pictures in the pause mode are blurred. (Refer to
page 76.)
It may take a while to load the disc.
F
EN EN 49 49