Settings For An External Device; Connection To An External Device; Setting For The Video Input - Sanyo FWZV475F Owner's Manual

SETTINGS FOR AN EXTERNAL DEVICE

Connection to an External Device

Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front) or L1 (Rear).
Use S-video or the RCA audio/video cables for this connection.
or
S-VIDEO VIDEO
OUT OUT
RCA
S-video
or video
cable
cable
L2
to L2 IN
Supplied cables used in this connection are as follows:
RCA audio cable (L/R) x 1
•
RCA video cable x 1
•
Please purchase the rest of the necessary cables at your local store.

Setting for the Video Input

1
Press [SETUP] and use [K / L] to select
"General Setting", then press [OK].
"General Setting" menu will appear.
2
Use [K / L] to select "Video", then
press [OK].
Submenu will appear.
AUDIO OUT
L R
external device
(camcorder, VCR etc.)
RCA
audio
cable
front of this unit
S-VIDEO
OUT
S-video cable
or
to L1 IN
3
Use [K / L] to select "Select Video", then
press [OK].
4
Use [K / L] to select desired external
input, then press [OK].
Select Video
L1 (Rear)
L2 (Front)
5
Use [K / L] to select the input jack
type to connect, then press [OK].
If you want to use VIDEO IN jack, select "Video
In".
If you want to use S-VIDEO IN jack, select
"S-Video In".
L1 (Rear)
Video In
S-Video In
6
Press [SETUP] to exit.
VIDEO AUDIO OUT
OUT
L R
RCA
or
video
RCA audio cable
cable
L1
rear of this unit
EN EN 37 37