Table of Contents
Advertisement
Basic Operations
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
To
change sound setting
1. Press the [SOUND] button to switch to the
so'und adjustment selection display.
*
The factory default sound setting is "Z-
EHCR+".
2. Then press the
[~]
or
[~]
button to
select the sound adjustment mode.
Each time you press the [........] or
[~]
button, the sound adjustment mode
changes as following order:
"Z-EHCR+"
~
"BASS"
~
"TREBLE"
~
"BALANCE"
~
"FADER"
~
"NF VOL"
*
In the case of display blinking "ENT", you
can press the
[rJ:]
button to adjust the
setting value.
*
The sound adjustment mode will be
displayed for 2 seconds before showing the
sound setting.
3. Turn the [ROTARY] knob to adjust the
selected audio mode.
4. After completing settings, press the
[SOUND] button to return to the previous
mode.
• Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory.
Select the one you prefer.
*
The factory default setting is "OFF".
2-1. Select "Z-EHCR+".
3-1. Each time you turn the [ROTARY] knob,
the tone effect changes in the following
order:
"OFF"
~
"B-BOOSr'
~
"IMPACT'
~
"EXCITE"
~
"CUSTOM"
OFF
: no sound effect
B-BOOST : bass emphasized
IMPACT
: bass and treble emphasized
EXCITE
: bass and treble emphasized
mid emphasized
CUSTOM : user custom
When "B-BOOST/IMPACT/EXCITE" is set:
3-2. Press the
[rJ:]
button.
3-3. Turn the [ROTARY] knob to adjust the
setting in the range of -3 to +3.
*
The factory default setting is "0".
3-4. Press the [rN 1 :] button to return to the
previous mode.
When "CUSTOM" is set:
3-2. Press and hold the
[rJ:]
button for 1
second or longer. Bass/treble
characteristics become flat and "FLAr' is
show in the display.
3-3. Turn the [ROTARY] knob to change to the
"OFF" mode.
• Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to "CUSTOM".
2-1. Select "BASS".
3-1. Press the
[rJ:J
button.
3-2. Press the
[~]
or
[~]
button to select as
following order.
"B<G 0>"
~
"B<F 60>"
~
"Q
1"
3-3. Turn the [ROTARY] knob to adjust the
gain, the F (center frequency) and the Q.
B<G 0> :The factory default setting is "0".
(Adjustment range: +7 to -7)
B<F 60> :The factory default setting is
"60".
(Adjustment range: 60/80/100/
200)
Q 1
:The factory default setting is "1".
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the
[rJ:]
button to return to the
previous mode.
DB285USB
13
Advertisement
Table of Contents
