Changing The Copy Ratio (Copy Ratio); Enlarging/Reducing Originals To A Standard Size (Preset Zoom) - Canon iR3300 Copying Manual

Changing the Copy Ratio Changing the Copy Ratio
Changing the Copy Ratio Changing the Copy Ratio
You can set the machine to adjust the copy ratio automatically, or to specify the copy ratio for a job.
NOTE
• • • •
If you want to make copies at the copy ratio of 100%, press [1:1].
Enlarging/Reducing Originals to a Standard Size Enlarging/Reducing Originals to a Standard Size Enlarging/Reducing Originals to a Standard Size Enlarging/Reducing Originals to a Standard Size
(Preset Zoom) (Preset Zoom) (Preset Zoom) (Preset Zoom)
You can enlarge or reduce standard size originals to a standard paper size.
IMPORTANT
• • • •
Place your originals horizontally in the following cases:
- When enlarging A4-size originals to A3-size paper.
- When enlarging A5-size originals to A3-size paper.
• • • •
When reducing A3-size originals to A4-size with Image Orientation Priority set to [Off], place A4R-size paper in the
paper drawer or stack bypass.
NOTE
• • • •
Placing an original horizontally means setting the original with the longer side sideways.
n Reduce Reduce
Reduce Reduce
The copy ratio set when making reduced copies is as follows:
→
--A3 A4 (70%)
→
--A3 A5 (50%)
--Minimum (25%)
n Enlarge Enlarge Enlarge Enlarge
The copy ratio set when making enlarged copies is as follows:
- Maximum
→
- A5 A3 (200%)
→
- A4 A3 (141%)
NOTE
• • • •
The copy ratio of 800% is available only when the original is placed on the platen glass.
(800%)
(400%)
(Copy Ratio) (Copy Ratio) (Copy Ratio) (Copy Ratio)

Changing the Copy Ratio (Copy Ratio)

1 1 1 1
1-27 1-27
1-27 1-27