Recalling A Previous Copy Setting (Recall) - Canon iR3300 Copying Manual

Recalling a Previous Copy Setting Recalling a Previous Copy Setting Recalling a Previous Copy Setting Recalling a Previous Copy Setting
With this function, you can recall up to three previous copy settings and make copies using these
settings.
IMPORTANT
• • • •
One copy job is defined by setting the number of copies, exposure, copy ratio, etc., and pressing
Auto Clear function is [On], or by calling up a copy job stored in memory. If one of these keys was not pressed, or if the
Auto Clear function is not active, then calling up a copy job by pressing [Recall] is not possible.
• • • •
The Standard mode cannot be recalled by this procedure.
• • • •
Identical copy settings are counted as one setting.
NOTE
• • • •
Once stored, the last three copy settings are held in memory even if the power is turned off.
1 1 1 1
Place your originals, and press [Special Features] Place your originals, and press [Special Features] Place your originals, and press [Special Features] Place your originals, and press [Special Features]
2 2 2 2
Select either [1 Before], [2 Before], or [3 Before] Select either [1 Before], [2 Before], or [3 Before] Select either [1 Before], [2 Before], or [3 Before] Select either [1 Before], [2 Before], or [3 Before]
[Done]. [Done]. [Done]. [Done].
The display returns to the Basic Features screen.
NOTE
• • • •
You can also check which copy jobs are stored to memory other than the currently displayed copy job by pressing [
t
or [ ].
3 3 3 3
Press Press Press Press
Copying starts.
2-56 2-56

Recalling a Previous Copy Setting (Recall)

2-56 2-56
. . . .
(Recall) (Recall)
(Recall) (Recall)
→
[Recall]. [Recall]. [Recall]. [Recall].
→
confirm the settings confirm the settings confirm the settings confirm the settings
or when the
→ →
press [OK] press [OK] press [OK] press [OK]
s
]