Specifications - Sharp CD-DVD500H Operation Manual

Hide thumbs Also See for CD-DVD500H:
Table of Contents

Advertisement

Specifications

CD-DVD500H
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
General
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 255 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 270 mm (10-11/16")
Height: 330 mm (13")
Depth: 372 mm (14-11/16")
Weight
8.8 kg (19.4 lbs)
(*) This power consumption value is obtained when the demonstration mode is can-
celled in the power stand-by mode. Refer to page 14 to cancel the demonstration
mode.
Amplifier
Output power
Front speakers (Main):
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Front speakers (Subwoofer):
RMS: 80 W (40 W + 40 W) (10 % T.H.D., 100 Hz)
Centre speaker:
RMS: 30 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 40 W (20 W + 20 W) (10 % T.H.D., 1 kHz)
Output terminals
Front speakers (Main): 8 ohms
Front speakers (Subwoofer): 6 ohms
Centre speaker: 6 ohms
Surround speakers: 8 ohms
Subwoofer (Pre-out): 10 kohms
Headphones: 16 - 50 ohms (recommended; 32 ohms)
Audio Digital Out: Optical
Input terminals
Video/auxiliary (Audio Input): 500 mV/47 kohms
74
ENGLISH
DVD/CD player
Signal system
NTSC/PAL
Supported disc types
DVD (Region number 2, ALL), audio CD, CD-R, CD-RW
Video output
Output socket: SCART
Output levels: 0.7 Vp-p (75 ohms RGB output)
1.0 Vp-p (75 ohms composite output)
Video signal
Horizontal resolution: 500 lines
S/N ratio: 60 dB
Audio signals
Frequency characteristics:
Linear PCM DVD: 4 Hz to 22 kHz (48 kHz sampling)/
CD: 4 Hz to 20 kHz
S/N ratio: 96 dB 1 kHz (CD)
Dynamic range: 96 dB (Linear PCM DVD)
Total harmonic distortion ratio: 0.006 % maximum
Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Cassette deck
Frequency response
50 - 14,000 Hz (Normal tape)
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.25 % (WRMS)
4 Hz to 44 kHz (96 kHz sampling)
96 dB (CD)

Advertisement

Table of Contents
loading

Table of Contents