Recording From A Cd (Cds) - Sharp CD-DVD500H Operation Manual

Recording from a CD (CDs)

CD-DVD500H
64 ENGLISH
You can record 3 CDs continuously.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the DVD/CD button and load the desired disc.
4
Press one of the s s s s s 1 - s s s s s 3 buttons to select the disc to be re-
corded first.
5
Press the REC PAUSE I6 I6 (I6 I6) button.
I6 I6 I6 I6 I6 I6
Recording will be paused.
6
Press the 0 0 0 0 0 button to start recording.
CD playback will start approximately 7 seconds after the tape starts.
Recording is started from the selected CD. When the playback of the last
disc is finished or the end of the tape is reached, the CD and the cassette will
stop automatically.
To perform programmed recording:
1. Programme discs and tracks (page 52).
2. Press the REC PAUSE I6 (I6) button.
3. Press the 0 button.
To stop recording:
Press the button.
The CD and tape will stop.
Note:
If you load a DVD disc(s), it will be skipped.