Recording From The Radio - Sharp CD-DVD500H Operation Manual

Recording from the radio

Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback
only.
1
Tune in to the desired station (see page 53).
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE I6 I6 (I6 I6) button.
I6 I6 I6 I6 I6 I6
Recording will be paused.
4
Press the 0 0 0 0 0 button to start recording.
To interrupt recording:
Press the REC PAUSE I6 (I6) button.
To resume recording, press 0 button.
To stop recording:
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
CD-DVD500H
ENGLISH 65
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15