Table of Contents
Advertisement
Selecting titles from the menu
CD-DVD500H
Some DVDs have a title menu that you use to select the title you want to play.
To select a title
This function can be performed with only discs that have been played once, totally or
partially.
1
Whilst the disc is stopped, press the TOP MENU button to display its title
menu.
2
Use the
or
button to select the title you want.
3
Press the 0 0 0 0 0 or ENTER button to start playing the selected title.
Notes:
Some DVDs use the term "top menu" instead of "title menu".
If the disc you are using does not have a title menu, nothing appears on the screen
even if you press the TOP MENU button.
The procedure shown here provides only general steps. The actual procedure for
using the title menu depends on the disc you are using. See the disc jacket for
details.
The title menu does not appear immediately after you load a disc. It appears only if
the disc has been played once, totally or partially.
40
ENGLISH
Setting parameters using the disc menu
Some DVDs include a disc menu that you can use to select subtitle set, audio channel,
and Dolby Digital (5.1 channel), DTS or MPEG audio. You can also turn disc menu on
and off.
To turn on subtitling (example)
This function can be performed with only discs that have been played once, totally or
partially.
1
Whilst the disc is stopped, press the MENU button to display the disc menu.
2
Use the
or
button to select the subtitle item on the disc menu.
3
Press the ENTER button to display the subtitle language selection screen.
4
Use the
or
button to select the desired subtitle language.
5
Press the ENTER button to register your selection and display the subtitles
in the language you have set.
Repeat the above procedure to make other settings (audio channel,
Dolby Digital, DTS, MPEG audio, etc.).
Notes:
The procedure shown here provides only general steps. The actual procedure for
using the disc menu depends on the disc you are using. See the disc jacket for
details.
The disc menu does not appear immediately after you load a disc. It appears only if
the disc has been played once, totally or partially.
During playback, you can also press the SUBTITLE button on the remote control
for the same operation in steps 1 - 3.
Advertisement
Table of Contents
