Table of Contents
Advertisement
Listening to a preset station
CD-DVD500H
To preset a station
You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the radio" on page 53.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the 5
4 button to select the preset channel number.
2
2
2 4
2
2
4
4
4
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
54
ENGLISH
3 PRESET X X X X X or W W W W W PRESET
5 3
5
5
3
3
5
3
To recall a preset station
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5
5 3
5
3
3
3
than 0.5 seconds to select the desired station.
Preset channel
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5 3
5
5
3
3
3
more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in
sequentially, for 5 seconds each.
2
Press the 5
3 PRESET X X X X X or W W W W W PRESET 2
5
5 3
5
5
3
3
3
when the desired station is located.
To erase entire preset memory
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Press the ON/STAND-BY button whilst holding down the TUNER (BAND) button
and X-BASS/DEMO button until "TUNER CL" appears.
4 button for less
2
2 4
2
2
4
4
4
Frequency and frequency band
4 button for
2 4
2
2
2
4
4
4
4 button again
2
2
2
2 4
4
4
4
Advertisement
Table of Contents
