Select The Mounting Orientation - Bosch MIC-71xx Installation Manual

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Avoid installation practices that may bring the camera's metal mountings in contact with
materials such as stainless steel. Such contacts can result in galvanic corrosion and degrade
the cosmetic appearance of the camera. These cosmetic damages caused by improper
installation are not covered by warranty as they do not affect the functionality of the camera.
7.2

Select the Mounting Orientation

MIC Series cameras are designed to be mounted upright (straight up, 90°), inverted (straight
down, 90°), or canted upright (ball up, 45°). The tilt limits for the canted unit prevent it from
working properly if mounted ball down. See the figures below for illustrations of the correct
and the incorrect mounting orientations of MIC cameras.
Correct mounting orientation -
Note the position of the visor when the camera is installed in inverted orientation. The visor is
close to the top of the pan shaft (the body of the MIC), instead of at the bottom of the
inverted camera.
Note: For canted cameras, ensure that your mounting location provides the necessary
clearance (370 mm (14.6 in.)) for the camera head to pan.
Bosch Security Systems
upright, inverted
Installation Manual
Mounting Location and Mounting Orientation | en
Correct mounting orientation -
canted
Incorrect mounting orientation
2015.12 | 3.0 | F.01U.291.520
11