Two-Touch Memory; Two-Touch Memory Overview; And Storage - AT&T CL4939 User Manual

Two-touch memory

Two-touch memory
ENTER LOCATION
_
12:00
AM
ENTER NUMBER
8887227702_
12:00
AM
ENTER LOCATION
_
12:00
AM
STORED
12:00
AM
Two-touch memory overview and
storage

Two-touch memory overview

This telephone has 10 two-touch memory
locations (speed dial locations) where you can
store telephone numbers you wish to dial using
fewer keys than usual.
Each two-touch memory location can store a
telephone number with up to 24 digits.
Two-touch memory storage
Use the following steps to store a telephone
number in a desired two-touch memory location.
11-20 15
1. When the telephone is idle, press MEM. The
screen shows ENTER LOCATION.
Press SELECT, the screen displays
2.
ENTER NUMBER.
3. To copy the last number dialed, press
11-20 15
REDIAL/
-OR-
Use the dial pad keys to enter the telephone
number (up to 24 digits).
•
11-20 15
•
Press MEM or SELECT. The screen shows
4.
ENTER LOCATION.
11-20 15
5. Press a dial pad key (0 through 9) to choose
the desired two-touch memory location for the
new entry. The screen shows STORED with a
confirmation tone and then returns to idle mode.
• If you enter more than 24 digits in step 3, the
screen shows ONLY 24 ALLOWED with an error
tone.
• If the two-touch memory location you selected
in step 5 is occupied, the new telephone
number replaces the old one. Take caution not
to replace entries you do not wish to delete
from the two-touch memory locations.
(up to 24 digits).
PAUSE
To backspace and erase a digit, press REMOVE.
To insert a four-second dialing pause, press
/PAUSE. A P appears on the screen.
REDIAL
NOTES:
27