Two-touch memory
Two-touch memory
REVIEW
ENTER NUMBER
8888832445_
ENTER LOCATION?
STORED
ENTER NUMBER
_
NOTE: If you enter
more than 24 digits in
a telephone number in
step 4, the screen shows
ONLY 24 ALLOWED.
Two-touch memory overview and
storage
Two-touch memory overview
This telephone has 10 two-touch memory
locations (speed dial locations) where you can
store telephone numbers you wish to dial using
fewer keys than usual.
Each two-touch memory location can store a
telephone number with up to 24 digits.
blinking
Two-touch memory storage
Use the following steps to store a telephone
STORE
number in a desired two-touch memory location.
When the telephone is idle, press MEM.
1.
2.
Press
3.
Press SELECT, the screen shows ENTER NUMBER.
4.
Use the dial pad keys to enter the telephone
number (up to 24 digits).
•
•
•
•
•
Press SELECT. The screen shows
5.
ENTER LOCATION?
6.
Press a dial pad key (0 through 9) to choose
the desired two-touch memory location for the
new entry. The screen shows STORED and then
ENTER NUMBER.
7.
Repeat steps 4 through 6 above to store a
number in another two-touch memory location.
-OR-
Press REMOVE to return to idle mode.
/
or
/ until STORE is blinking.
DIR
CID
To backspace and erase a digit, press
To insert a space between digits, press
/ . A dash appears on the screen.
CID
To insert a three-second dialing pause, press
/
twice. A P appears on the screen.
CID
To insert a flash signal for using the service
supplied by your telephone service provider,
press FLASH. An F appears on the screen.
To copy the last number dialed (up to 24
digits), press REDIAL.
23
/ .
DIR