AT&T CL4939 User Manual page 51

Answering system operation
PLAY
12:00
AM
USE STOP TO END
12:00
AM
USE STOP TO END
12:00
AM
USE STOP TO END
12:00
AM
Outgoing announcement
To play the outgoing announcement
Use the following steps to listen to the outgoing
announcement.
1. Press
and the message window displays A.
11-20 A 2. Press
to PLAY.
Press SELECT. The current announcement plays.
3.
The message window displays AP.
4. When the playback is finished, the telephone
11-20 AP
beeps once and then automatically returns to
idle mode.
To delete your outgoing announcement
Use the following steps to delete the outgoing
announcement you recorded.
1. Follow steps 1-3 in To play the outgoing
announcement on this page to play back the
current announcement.
2. Press DELETE during playback to delete your
AP
11-20
announcement. The telephone announces
"Deleted" with a beep and displays dE on the
message window for two seconds.
3. The system plays the pre-recorded
announcement, "Hello, please leave a message
11-20 dE
after the tone." After a beep, the telephone
automatically returns to idle mode.
When your outgoing announcement is deleted,
calls are answered with the pre-recorded
announcement, "Hello, please leave a message
after the tone."
/ANNC. The screen shows RECORD
SKIP
REPEAT/
MEMO
45
SKIP/
or
ANNC
to scroll