Telephone memory
Store a pause in a memory number
Press REDIAL/PAUSE once to store a
three to four second pause in the dialing
sequence. Each additional press will add
another three to four second pause.
NOTE: Each three to four second pause is
counted as one digit when storing numbers
in the telephone memory.
Dial a number in a one-touch memory
To dial a number stored in memory
locations
,
1.
Lift the handset or press
for a dial tone.
2.
Press the memory button ( ( ,
) where the number is stored. The
number is dialed automatically.
Dial a number in a two-touch memory
To dial a number stored in a two-touch
memory location (0-9):
1.
Lift the handset or press
a dial tone.
2.
Press MEM, then press the memory
button (0-9) where the number is stored.
The number is dialed automatically.
Erase a memory number
To erase a memory location, store a
new telephone number in its place.
13
or
:
and wait
or
and wait for