Accessories (On Select Models) - DJG Scenera Versa-Fit Overhead Barrier Instruction Manual

4358-3775B Scenera OHB 5/30/06

Accessories (on select models)

1
A
B
Infant Insert (on select models): When using insert
(B), make sure insert does not cover your infant's face in
any way. Remove the insert for older babies and
toddlers.
To remove insert: Unthread the harness from the
splitter plate. Remove insert (see section "To Change
Harness Location"). Rethread harness and reattach to
splitter plate. Reverse to replace infant insert.
2
3
14
2:09 PM Page 17
Pillow (on select
models): The pillow (A)
provides extra comfort for
your toddler.
To remove pillow: Pull
fastening strips off top of
pad and remove pillow. To
replace, pull top fastening
straps over top of pad and
attach on the back side of
pad.
Install Cup Holder (on
select models): Hook
cup holder on side of shell.
Make certain bottom of
cup holder snaps into
place. Cup holder can be
on either side.
Harness Covers (on
select models): Harness
covers help provide
comfort to the neck. For
harness covers to fit
correctly, you may have to
fit the upper ends of the
covers through the harness
slots. To remove, unthread
harness from harness
bracket. Slide covers off
and reattach harness.
Securing Your Child in the Child
Restraint
Lower overhead barrier
1
and position harness straps
over the child's shoulders.
Push buckle plate into
2
buckle until you hear a
"click". Remember to
always pull up on barrier
to make sure buckle is
locked tightly with each
use.
Snap the harness retainer
3
together.
15
continued on next page.