Adjusting The Top Anchorage (Tether) Strap; Removing Seat Pad For Cleaning - DJG Scenera Versa-Fit Overhead Barrier Instruction Manual

Table of Contents

Advertisement

4358-3775B Scenera OHB
5/30/06
Adjusting the Top Anchorage
Strap
The top anchorage strap is used for the forward-facing
position only.
Most vehicles made after 9/1/99 already have the anchor
hardware for a top anchorage strap. Refer to your
owner's manual or call your dealer.
Storage of Top Anchorage Strap:
Pull loose
end to
tighten
Lift up to
loosen
40
2:09 PM
Page 43
Rear-facing position:
Place top anchorage strap
over the back of the child
restraint with the anchor
hook secured recline
stand.
To Attach Top
Anchorage Strap:
Put knee in child restraint
and push down; attach
hook to anchor in vehicle.
To Adjust Top
Anchorage Strap:
To tighten; pull on free end
of top anchorage strap.
To loosen; lift up on top
anchorage lock and push
lock toward top anchorage
hook.

Removing Seat Pad for Cleaning

WARNING
!
Do not use this child restraint without the
seat pad. Failure to do this can result in
serious injury.
Removal of Harness:
Press red button on
1
buckle to release the
buckle plate.
From the back of the seat,
2
unfasten harness from
splitter plate.
Pull harness through the
3
harness slots from the
front.
Lift barrier over seat shell.
4
41
continued on next page.

Advertisement

Table of Contents
loading

Table of Contents