Assembly - Nautilus T626 Assembly Manual

DO NOT CUT the Shipping Strap on the Base Assembly until it has been placed face up as shown in
the appropriate work space.
1. Fold the Walking Deck on the Base Assembly
Once the Base Assembly has been properly placed in the workout area, cut the Shipping Strap. Using the support bar found
below the rear of the walking belt, lift the walking deck fully upward and engage the hydraulic lift. Be sure that the hydraulic lift
is correctly locked in place.
Use proper safety precautions and lifting techniques. Bend your knees and elbows, keep your back straight and pull up
equally with both arms. Make sure that your own physical strength is capable of lifting the walking deck until it engages
the locking mechanism. Use a second person if necessary.
Do not use the walking belt or rear roller to lift the treadmill. These parts do not lock in place and can abruptly move.
Injury to you or damage to the machine can occur.
Make sure that the locking mechanism is engaged. Carefully pull back on the Walking Deck and make sure that it does not
move. When you do this, keep clear of movement path in case the treadmill lock is not engaged.
Do not lean against the treadmill when it is folded. Do not put items on it that could cause it to become unstable or fall.
7
7

ASSEMBLY

11