Default Settings - Kyocera Mita KM-1505 Service Manual

2BT

(2) Default settings

User status report
Outputs the details of the default settings.
1. Select "F01" and press the enter key.
User status report is printed out.
Exposure mode
Selects the image mode at power-on.
1. Select "F02" and press the enter key.
2. Select the exposure mode and press the enter
key.
Exposure mode: 1 (auto exposure)/
2 (text and photo)/3 (photo)/4 (text)
Exposure steps
Sets the number of exposure steps for the manual
exposure mode.
1. Select "F03" and press the enter key.
2. Select "3 steps" or "5 steps" and press the enter
key.
Setting range: 1 (3 steps)/2 (5 steps)
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select "F04" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 5
Text and photo original exposure adjustment
Adjusts the exposure to be used when text and photo
original is selected for the image mode.
1. Select "F05" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 5
Photo original exposure adjustment
Adjusts the exposure to be used when photo original
is selected for the image mode.
1. Select "F06" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 5
Text original exposure adjustment
Adjusts the exposure to be used when text original is
selected for the image mode.
1. Select "F07" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 to 5
1-3-12
Drawer paper size
Sets the size of paper loaded in the drawer.
1. Select "F08" and press the enter key.
2. Select the size of paper and press the enter key.
" × 14")/2 (A5R/8
Paper size: 1 (A4R/8 1 /
2
" × 8
11"R)/3 (Folio/5 1 / 1 /
2
2
Non-standard size paper for the bypass tray
Sets if non-standard size paper is available when the
paper is fed from the bypass tray.
1. Select "F09" and press the enter key.
2. Select "on" or "off" and press the enter key.
Setting range: 1 (on)/2 (off)
Non-standard size paper width setting for bypass tray
Sets the paper width when non-standard size is fed
from the bypass tray.
1. Select "F10" and press the enter key.
2. Enter the setting and press the enter key.
Setting range is 4.13" to 8.50" (105 to 216 mm).
Note: This setting item will not be displayed if "off"
is selected in "Non-standard size paper for the
bypass tray".
Copy limit
Sets the limit of the number of copies that can be
made at a time.
1. Select "F11" and press the enter key.
2. Enter the setting and press the enter key.
Setting range is 1 to 99 copies.
Silent mode
Sets the length of time from when copying ends to
when entering the silent mode.
1. Select "F12" and press the enter key.
2. Select the setting and press the enter key.
Setting range: 1 (0 s)/2 (5 s)/3 (10 s)/4 (15 s)/
5 (30 s)
Auto shut-off
Sets if the auto shut-off function is available.
1. Select "F13" and press the enter key.
2. Select "on" or "off" and press the enter key.
Setting range: 1 (on)/2 (off)
" ×
1 /
2
"R)