Detaching And Refitting The Main Charger Unit - Kyocera Mita KM-1505 Service Manual

2BT

(2) Detaching and refitting the main charger unit

Follow the procedure below to replace the charger assembly.
Prucedure
1. Remove the image formation unit (see page
1-6-27).
2. Remove the screw holding the main charger
assemby and then the assembly.
3. Replace the main charger unit and refit all the
removed parts.
• When fitting the main charger unit, hold it
down and fit it close to the cleaning unit.
1-6-28
Main charger unit
Figure 1-6-46