Periodic Maintenance Procedures - Kyocera KM-1620 Service Manual

Periodic maintenance procedures

Maintenance
Section
part/location
Test copy and Perform at the maximum
test print copy size
Maintenance
Section
part/location
Paper feed Paper feed pulley
section
Separation pulley
Forwarding pulley
Bypass paper feed pulley
Bypass separation pad
Left registration roller
Right registration roller
Registration cleaner
Trans guide film
Maintenance
Section
part/location
Optical section Slit glass
Contact glass
Mirror 1
Mirror 2 and mirror 3
Lens
Reflector
Exposure lamp
Optical rail
Original size detection
sensor
Maintenance
Section
part/location
Transfer and Transfer roller
separation Separation electrode
section
Method Maintenance cycle
Test copy Every service
Method Maintenance cycle
Clean or replace -
Clean or replace -
Clean or replace -
Clean or replace -
Clean or replace -
Clean or replace Every 150,000 counts
Clean Every 150,000 counts
Clean or replace Every 150,000 counts
Check or replace -
Method Maintenance cycle
Clean Every 150,000 counts
Clean Every 150,000 counts
Clean -
Clean -
Clean -
Clean -
Clean or replace -
Grease -
Clean -
Method Maintenance cycle
Clean -
Check or clean -
Points and cautions
Points and cautions
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with the alcohol.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Vacuum.
Points and cautions
Clean with alcohol and then
a dry cloth.
Clean with alcohol and then
a dry cloth.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the copy image.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the copy image.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the copy image.
Clean with alcohol and then a dry
cloth only if vertical black lines
appear on the copy image.
Replace if an image problem
occurs or after the exposure
lamp does not turn on.
Check noise and shifting and
then apply scanner rail grease
EM-50E.
Clean with alcohol or a dry cloth.
Points and cautions
Vaccum or clean with a dry cloth. 1-6-37
Clean with the equipped brush.
2C9-3
Page
Page
1-6-5
1-6-3
1-6-5
1-6-9
1-6-9
1-6-11
1-6-11
1-6-11
Page
1-6-17
Page
2-4-9