Drive Chain - Yamaha RX10K Supplementary Service Manual

A B

DRIVE CHAIN

DRIVE CHAIN
Oil level inspection
WARNING
The engine and muffler will be very hot after
the engine has run. Avoid touching a hot en-
gine and muffler while they are still hot with
any part of your body or clothing during in-
spection or repair.
1. Place the machine on a level surface.
2. Check:
S Oil level
Checking steps:
S Remove the dipstick 1 and wipe it off with a
clean rag.
Reinsert the dipstick.
CAUTION:
There is a magnet attached to the end of the
dipstick. It is used to remove any metal par-
ticles that may accumulate in the drive chain
housing.
Be sure to:
S Pull the dipstick out slowly and gently so
the metal particles do not fall off the mag-
net back into the drive chain housing.
S Wipe off the magnet before reinserting the
dipstick into the drive chain housing.
S Remove the dipstick and check that the oil is
between the upper a and lower b levels. If
not, add oil to the upper level.
A For models without reverse transmissions
(RX10, RX10S, RX10M, RX10MS)
B For models with reverse transmissions
(RX10R, RX10RS)
2-34
INSP
ADJ