Yamaha RX10K Supplementary Service Manual page 134

COOLING SYSTEM
WARNING
To avoid severe injury or death:
S Make sure the machine is securely sup-
ported with a suitable stand.
S Do not exceed 3,000 r/min. Drive line dam-
age and excessive V-belt wear could occur,
or the machine could unexpectedly move
forward if the clutch engages.
S Operate the engine only in a well-ventilated
area.
S Remove the coolant filler cap and bleed the
cooling system again, as described above.
No air bubbles ! OK.
S Add coolant to the specified level.
S Pour coolant into the coolant reservoir 1 until
the coolant level reaches the "COLD LEVEL"
level mark 2 .
3. Install:
S Rear cover
2-8
INSP
ADJ