Yamaha RX10K Supplementary Service Manual page 434

1 Coolant reservoir tank
2 Reservoir tank hose
3 Parking brake cable
4 Brake hose
5 Clamp the hose at the white
paint position. Point the clamp
position to the front outside
6
Clamp the battery positive lead
7
Headlight lead
8
Tighten the frame ground and
voltage regulator upper bolt to-
gether
9
Engine oil tank hose
10 Point the clamp tightening
direction to the downward
11
to the tail / brake light
12
Tighten the frame cross mem-
ber and frame together
13
Fuse box
Route the gear position switch
14
lead to the reverse gear if the
reverse function is equipped, or
fold it back and secure it if the
reverse function is not provided
15 Wire harness
16 Point the clamp position to the
front outside
17 Drain hose
18 Less than 30 mm (1.2 in)
19 Clamp the coolant hose
20 Clamp it at the white paint posi-
tion
Point the clamp position to the
21
downward
Point the clamp position to the
22
inside
CABLE ROUTING
9-34
SPEC