Furuno FCV-1900 Operator's Manual page 23

5. Change the setting.
For setting window or box
1) Rotate the ENTER knob to select a menu item.
2) Push the ENTER knob to enter the setting.
The setting window or box disappears. To escape without changing setting,
press the MENU/ESC key instead of the knob.
For data input box
1) Rotate the ENTER knob to select the digit to change.
2) Push the ENTER knob.
3) Rotate the ENTER knob to change the value.
4) Push the ENTER knob to enter the setting value.
The cursor moves to the next right digit. After you change the digit in the ones
places, the cursor surrounds all digits. If you only change one digit, push the
ENTER knob several times until the cursor surrounds all digits.
0 6 5 . 0
(20.0∼110.0ºF)
Select the digit to change.
The cursor is selecting the digit, the value can be changed.
The value has changed.
The cursor moves to the right digit after entering the left digit.
The cursor surrounds all digits.
5) Push the ENTER knob when the cursor is selecting all digits to confirm setting.
The enter box disappears.
6. To select another menu, press the MENU/ESC key.
7. Press the MENU/ESC key several times to close the menu.
Adjusting the image of the external fish finder and telesounder
When an external fish finder (DFF1, DFF3 or BBDS1) or telesounder (TS-80M2 or TS-
7100) is connected, it is available to display the echo of the external fish finder and
telesounder on the user display. For how to display, see section 2.2. To adjust the im-
age of the external fish finder and telesounder, do as follows;
1. Press the MENU/ESC key.
When an external fish finder or telesounder is
connected, the [External fish finder] tab
([DFF1], [DFF3] or [BBDS1]) or [Telesounder]
tab appears next to the [Setting] tab.
2. Rotate the ENTER knob to select a tab.
3. Push the ENTER knob to show the menu for the
[External fish finder] tab or [Telesounder] tab.
The operating procedure is the same as that for
the [Setting] tab.
0 6 5 . 0 0 6 5 . 0 8
5
(20.0∼110.0ºF)
(20.0∼110.0ºF)
1. OPERATION
0 6 8 . 0 0 0 6 5 . 0
(20.0∼110.0ºF) (20.0∼110.0ºF)
[External fish finder] tab and
[Telesounder] tab
Setting BBDS1 Telesounder
Sounder Interference
Display Color Erase
Measurement White Edge
Alarm Clutter
Data TVG
System STC
Pic. Advance
Smoothing
Bottom Zone
Example: When BBDS1 and
telesounder are connected.
Medium
0%
Off
x1
3
1-13