Table of Contents
Advertisement
10.Set Mode
1
O~8-2
Over Write Function
This function allows editing (overwriting and deleting) channels registered in the
Memory mode.
1.Rotate the
upper
dial
and
select
"Overwrite".
"Overwrite" will be indicated on the display as
shown on the right.
B 5
fiiJ
145.000
Overwrite
Prohibited
2.Rotate the lower dial and select one of the overwrite settings.
When rotating the dial, the settings will switch as shown in the illustration.
[ACCepted -
Prohibited - - fail-safe
J
Accepted
This setting will make the Overwrite function valid. Memories
registered can be edited.
Prohibited
This setting will make the Overwrite function invalid. Memories
registered cannot be edited.
Fail-safe
Memories registered can be edited. When turning the
transceiver on again, the setting will be automatically valid.
Please read "Deleting Memory Channels (P.44)" to learn how to delete memory
channels.
( 10-9 Scanning Settings
Various scanning functions are explained in this section.
1.Select "Scanning" from the menu of the Set mode.
2.By pressing the dial, the scanning settings sub menu will appear.
91
Advertisement
Table of Contents
