Adjusting The Width Of The Legrest; Central Legrest; Adjusting The Height Of The Central Legrest; Adjusting The Foot Angle Of The Central Legrest - Invacare Dahlia 30 Service Manual
Hide thumbs
Also See for Dahlia 30:
- User manual (56 pages) ,
- Service manual (53 pages) ,
- Mounting instruction (2 pages)
Table of Contents
Advertisement
3.14 Adjusting the width of the legrest
Loosen the screws A.
1.
Tools: 5 mm allen key
2.
Adjust the legrests to the desired width.
3.
Re-tighten the screws.
3.15 Central legrest
3.15.1 Adjusting the height of the central legrest
You can adjust the height of the legrest in the following two ways:
A
Alternative 1:
Loosen the screw A on the front of the telescopic tube.
1.
Tools: 5 mm Allen key
2.
Place the legrest in the desired position.
3.
Secure the legrest into place using the Allen screw.
Alternative 2:
Loosen the Allen screw B by the legrest attachment.
1.
Tools: 5 mm Allen key
2.
Adjust to the desired height.
3.
Re-tighten the screw
3.15.2 Adjusting the foot angle of the central legrest
A
1572308-B
A
B
A
Screw for foot angle adjustment
1.
Loosen the rear screw A on the side of the tube.
Tools: 5 mm Allen key
2.
Adjust the legrest to the desired angle.
3.
Retighten the screw.
4.
Repeat this procedure to adjust the angle of the other foot plate.
3.15.3 Adjusting the depth of the central legrest
Loosen the frontal screw A on the side of the tube.
1.
Tools: 5 mm Allen key
2.
Adjust the depth of the foot plate.
Tighten the screw A when you have found the desired depth.
3.
4.
Repeat this procedure to adjust the depth of the other foot plate.
3.15.4 Adjusting the angle of the central legrest
A
Loosen the adjustment knob A.
1.
2.
Hold the foot plate with the other hand.
3.
Adjust to the appropriate leg angle.
4.
Re-tighten the knob.
WARNING!
Risk of trapping fingers
When adjusting the foot plate, the fingers might get
trapped.
– Loosen the adjustment knob with one hand and hold
the foot plate with the other hand to avoid trapping
yours or anyone else's fingers.
CAUTION!
Risk of damage
The legrest might cause damage to the floor.
– When the seat is tilted forwards on a chair with a long
legrest length and low seat height, there is a risk of the
legrest hitting the floor and causing damage.
Settings and Adjustments
A
23
Advertisement
Table of Contents
