Tilt Scale Backrest; Tilt Scale Seat; Mounting The Attachment For Table Tray; Mounting The Table Tray - Invacare Dahlia 30 Service Manual

2.3 Tilt scale backrest

1.
A
C
Attach the clamps A with the tilt scale C to the push bar/push
handles or the backrest tubes and tighten the screws B.
2.
Place the end plugs D in the empty holes.
3.
Place the tilt scale for the backrest angle on the push bar/push
handle or on the backrest tubes according to picture E or F
above.

2.4 Tilt scale seat

1.
A
Place the tilt scale for the seat A on the seat frame B.
The tilt scale should be placed on the left side.
1572308-B
B
B

2.5 Mounting the attachment for table tray

1.
B
A
Mount the table attachment A with the attachment part facing
outwards. The plain surface B of the attachment should be
placed upwards when using the table on the thin armrests.
2.
C
To fit the table attachment A to the wide armrest, turn the
attachment around, the patterned surface C should now be
facing upwards.

2.6 Mounting the table tray

A
B
Mount the table tray A in the table tray attachments B.

2.7 Mounting the rear wheels

Press and hold in the quick-release button A.
1.
2. Place the rear wheel axle B in the rear wheel attachment C.
3. Pull the wheels outwards to check that the wheel is securely
locked in position.
WARNING!
Risk of injury
– Check that the rear wheel is securely locked in
position! It should not be possible to remove the
wheels when the quick-release button A is inactivated.
Assembly
A
C
A
7