Table of Contents
Advertisement
Connecting MonitorLink™/DVI
MonitorLink/DVI
(Figure 14)
The Monitor Link/DVI input uses a DVI-I Dual Link
connector for maximum cable flexibility. When
MonitorLink is used as a DVI-HDCP input, the
terminal is compliant with DVI-D Single Link
signals matching EIA-861 standards for standard,
extended and high definition video with scanning
rates of 480p and 1080i. However, this input is
not intended for use with personal computers or
devices outputting video signals with computer
resolutions. All other DTV video signals, such as
720p, need to be converted by the DTV receiver (or
compatible device) to one of the compatible signal
types. Please check the specifications on your
device before connecting.
1. Connect a MonitorLink/DVI cable from the TV
back panel to the Mitsubishi HD Receiver/
Controller back panel.
2. Connect the MonitorLink Control/RS-232 cable
from the TV back panel to the Mitsubishi HD
Receiver/Controller back panel.
3. Connect the L (left) and R (right) audio cables
from the HDTV receiver to AUDIO LEFT and
AUDIO RIGHT on the MonitorLink section of the
TV back panel.
Note: DVI and RS-232 cables can be found at
your local electronics store if they are not
included with your devices.
Please refer to www.mitsubishi-tv.com for more
information on RS-232C control.
CAUTION: To assure continued FCC
compliance, we recommend using a
shielded video interface cable with
bonded ferrite cores at each end, when
using the MonitorLink/DVI input.
WS-48315, WS-55315,
WS-65315, WS-65315A
back panel (section detail)
MitsubishiHD-5000
receiver/controller back panel
OUTPUTS
TO
TO
AV RECEIVER
DISPLAY
INPUT
MONITOR
1
2
3
4
PIP
S-VIDEO
VIDEO
AUDIO
LEFT
AUDIO
RIGHT
TM
IR OUTPUT
MonitorLink
DIGITAL AUDIO
MonitorLink
NetCommand
R
CONTROL/RS-232
OUTPUT
403XF-5K
2
Figure 14. Connecting MonitorLink
This connection supports copy protection
(HDCP). Some devices require connecting to
an analog input first, in order to view on-screen
menus and select DVI as the output. Please
review your equipment instructions for DVI
connectivity and compatibility.
TM
MONITORLINK
/DVI
ferrite
core
1
DTV
( Y PbPr/ GBRH V )
TM
MONITORLINK
480 i / 480P /1080 i
CONTROL
RS-232C
Y
G
Pb
H
B
2
P r
V
3
R
White
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
Red
3
White
Red
TM
/DVI
1
ferrite
core
21
Hide quick links:
Advertisement
Table of Contents
