Chapter 2: Connecting Your Projection - Mitsubishi TS-5057 Owner's Manual

Basic Connections
This section explains the basic connections you will need to make
between your Projection TV, antennas, and VCR. You will see there
are different connections shown depending on the type of antenna
you are using and whether or not you have a decoder box. Choose
the type of connection for the type of equipment you ihave.
If you are having difficulty making the connections to your Projec-
tion TV, you may want to contact your Mitsubishi dealer or your
local cable company.
This section explains:
• Projection TV + antenna or cable without a decoder box,
• Projection TV + cable with a decoder box,
• Projection TV + separate UHF and VHF antennas,
• Projection TV + VCR + antenna .or cable without a
decoder box,
• Projection TV + VCR + cable with a decoder box,
• Projection TV + audio system, and
• Projection TV + Mitsubishi products that have A/V Net-
work terminals.
DImportant: You must connect a VCR to see two active images when using
Picture-In-Picture (PIP).
bWarning: I You should unplug your Projection TV and any other components
I
before connecting them.
26 Chapter 2: Connecting Your Projection TV