Mitsubishi WS-65315A Owner's Manual page 46

V-CHIP Menu: Setting Up and Using V-Chip Lock
Passcode
������ ���� ����
������ ����
�� �� �� ��� �����
����� � ��� ���������
��� ��� ������ ��������
���� ����� ������
Figure 29. First time entry to the V-CHIP LOCK all
models
������ ���� ����
������ ����
�� �� �� ��� �����
����� ���� ���������
��� ��� ������ ��������
���� ����� ������
Figure 30. Re-entry to the V-CHIP LOCK all
models
46
���� ����
� � � �
���� ����
� � � �
Setting Up the V-CHIP LOCK
Passcode
(Figure 29)
Select V-CHIP LOCK from the MAIN menu
for first time setup or after you have canceled
your passcode. You will see the screen shown
in Figure 29. Use the number buttons on
the remote control to input a new four-digit
passcode, then press ENTER.
Before pressing ENTER, you can delete a
character and move back one character by
pressing CANCEL, or leave the passcode
screen by pressing MENU or HOME.
Entering the Passcode
(Figure 30)
Input your passcode as shown in Figure 30 (Note:
Text changes from "a new" to "your" passcode).
The next time you select V-CHIP LOCK from the
MAIN menu, you will see this screen.
If you forget your four-digit passcode,
see Appendix A, page 63.