Inputs Menu - Mitsubishi WD-60C8 Owner's Manual

48
5. TV Menus

Inputs Menu

Inputs Menu Options
Cable Box, Camcorder, CD/Audio,
DVD (DVD, DVD2, Blu-Ray), DVR,
Name
Game (Game, PS, Xbox, Wii), MP3
Player, PC, Satellite, VCR, AVR
On/Off (ANT 1 and ANT 2 only)
Delete (deactivated HDMI only)
Control On, Control Off (CEC-
enabled HDMI devices; operates only
when Inputs > NetCommand HDMI
Control is set to On)
General Notes
When you change an input name in the Name menu and then exit the Name menu:
• The name is changed
Input Selection menu is changed
• The icon in the
• Audio and video settings are changed to the defaults for the new device type.
736 or 835 Series TV:
•
Notes for HDMI devices
• Disconnecting an HDMI device:
menu until you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.
NetC ommand for HDMI and CEC-Enabled Devices: If CEC conflicts occur, turn off CEC signals in one of
•
these ways: a) Turn off all NetCommand for HDMI signals from the TV (Inputs > NetCommand HDMI Control
menu), b) Turn off NetCommand HDMI signals for specific devices (Inputs > Name menu), or c) Turn off each
device's internal CEC capability. See Appendix E for the TV's NetCommand for HDMI Control or, to turn on/off
a specific device's response to CEC signals, see the device's owner's manual.
Names of CEC-enabled devices: CEC-enabled devices send their own predefined name to the TV. You
•
cannot change the name of a CEC-enabled device; applies only when Inputs > NetCommand HDMI Control
is set to On.
Lets you put frequently used icons at the start of the Input Selection menu.
1.
Order
2.
3.
4.
736 or 835 Series TV
Sets up or changes NetCommand IR control of the current viewing device.
Learn
See detailed instructions in chapter 6, "NetCommand IR Control."
736 or 835 Series TV
AV Re-
Sets up or changes NetCommand IR control of an A/V receiver.
ceiver
See detailed instructions in chapter 6, "NetCommand IR Control," starting on page 58.
On, Off
NetCommand
HDMI Control
All previous NetCommand IR "learning" for the input is erased.
When you disconnect an HDMI device, the icon remains in the Input Selection
Press to highlight the icon to move.
Press ENTER to confirm the selection.
Press to drag the icon to the desired position.
ENTER to set the new position.
Press
Select On or Off to enable or disable the TV's control of CEC-enabled devices.
See Appendix E for details.
• Lets you assign or change names of inputs appearing in
the Input Selection menu.
- Press to move between inputs.
- Press to select a name.
• Lets you turn Ant-1 and Ant-2 On/Off (to display/hide in Input
Selection menu).
• Lets you delete unused HDMI inputs from the
menu.
• If you change the name of an input after performing Net-
Command "learning," the IR codes you "learned" are
erased.
Input Selection