Remote Control - Mitsubishi WD-60C8 Owner's Manual

Remote Control

1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch
to TV for operation of the TV, and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix C, "Program-
ming the Remote Control."
3. SLEEP: Sets the TV to turn off within 2 hours in incre-
ments of 30 minutes.
4. Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers
—
and the CANCEL key to enter digital sub-channel
numbers. Use also for entering letters or names in
menus.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, * , -).
5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV (QuickView ): Switches between the current
™
channel and the last channel viewed.
7. MUTE: Turns TV sound on and off.
8. SPLIT: Not used in this model.
9. FAV (Favorites): Scans through memorized lists of
favorite channels. See Setup > Edit > Fav1–Fav6
on page 44.
10. VOL / (Volume Up/Down): Changes sound
level.
11. CH/PAGE (Channel or Page Up/Down):
/
Scans up or down through memorized channels.
Pages up and down through screens when used with
ChannelView .
™
12. FORMAT: Changes the shape and size of the TV
picture.
13. LIST (835 Series): Works like the LIST key for a cable
box or satellite receiver when "learned" for NetCom-
mand or when the remote has been programmed for
the device.
14. INPUT: Displays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (ANT 1/2) or a connected
device.
15. (Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
4. TV Operation and Features
2
3
4
5
7
8
10
11
17
18
24 25 26
27 28 29
23
17. GUIDE: Displays or removes ChannelView
listing for ANT 1 and ANT 2. Displays DVD disc
or top menu for a NetCommand-controlled DVD
player. Displays the guide for a NetCommand-con-
trolled cable box or satellite receiver.
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip ratings information. See
"Status Display," page 30, for details.
19. AUDIO: Selects individual audio settings to adjust.
20. VIDEO: Selects individual video settings to adjust.
27
1
6
9
12
13
14
15
16
19
20
21
22
channel
™