Standard Cable Box, Satellite Receiver, Or Other Device With S-Video; Vcr To An Antenna Or Wall Outlet Cable - Mitsubishi WD-60C8 Owner's Manual

22
3. TV Connections
Standard Cable Box, Satellite Receiver,
or Other Device with S-Video
Required: S-Video cable and left/right analog stereo
audio cables.
1.
Connect the cable from the outside cable or satel-
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver.
2.
Connect an S-Video cable from
the cable box or satellite receiver back panel to
INPUT 3 S-VIDEO on the TV back panel.
3.
Connect left (white) and right (red) audio cables
from AUDIO OUT on the cable box or satellite
receiver to INPUT 3 AUDIO L and R on the TV back
panel.
Note: Refer to the cable box or satellite receiver
Owner's Guide for cable or dish antenna con-
nections to the receiver.
3D
GLASSES
R AUDIO L
EMITTER
DVI/PC INPUT
R R AUDIO AUDIO L L VIDEO
R AUDIO L
IR-
L
Output / External
AVR
Controller Input
AUDIO
ANT 2 / AUX
OUTPUT Y Pb Pr
ANT 1 / MAIN
R
Y/ VIDEO Pb Pr
S-VIDEO S-VIDEO
AUDIO L
R (480i / 480p / 720p / 1080i)
INPUT 3 INPUT 3
DIGITAL
AUDIO
OUTPUT
Figure 7. Connecting a device with S-Video
S-VIDEO OUT on
S-VIDEO
INPUT 3
HDMI
VIDEO: 480i/480p/720p/1080i/1080p
AUDIO: PCM STEREO
PC: VGA, W-VGA, SVGA, W-SVGA,
XGA, W-ZGA, SXGA, 720p/ 1080p
NetCommand R
HDMI
1 2 3
VCR to an Antenna or
Wall Outlet Cable
Required: Two-way RF splitter, two coaxial cables, right
and left analog audio cables, either S-video or compos-
ite video cable.
1.
Connect the incoming cable or antenna to
RF splitter.
2.
Connect one coaxial cable from
splitter to ANTENNA IN on the VCR back panel.
3.
Connect one coaxial cable from
splitter to ANT 1 on the TV back panel.
4.
Connect either an S-Video or composite video
cable from VIDEO OUT on the VCR back panel to a
VIDEO composite or S-VIDEO jack on the TV back
panel. Connect only one type of video cable;
S-Video is recommended, if available.
5.
To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO OUT
on the VCR to the associated AUDIO L and R jacks
on the TV back panel. If your VCR is mono (non-
stereo), connect only the white (left) cable.
TV back panel
GLASSES
ANT 1 / MAIN
EMITTER
Incoming
3.
cable
ANT 2 / AUX
ANT 1 / MAIN ANT 1 / MAIN
1.
3.
2.
2.
ANTENNA
IN
VCR
Figure 8. Connecting a VCR to an Antenna or Wall
Outlet Cable
IN on the
OUT on the RF
OUT on the RF
3D
S-VIDEO
INPUT 3
AVR
HDMI
AUDIO
OUTPUT VIDEO: 480i/480p/720p/1080i/1080p
DVI/PC INPUT
R R AUDIO AUDIO L L VIDEO VIDEO AUDIO: PCM STEREO
R AUDIO L
PC: VGA, W-VGA, SVGA, W-SVGA,
IR- XGA, W-ZGA, SXGA, 720p/ 1080p
L NetCommand
R
Output / External
Controller Input HDMI
Y Pb Pr
1 2
R
Y/ VIDEO Pb Pr
S-VIDEO S-VIDEO
R AUDIO L (480i / 480p / 720p / 1080i)
DIGITAL
INPUT 3 INPUT 3
AUDIO
OUTPUT
R AUDIO L
VIDEO
4.
5.
4.
5.
L
R VIDEO S-VIDEO
AUDIO OUT OUT
3
OUT