Setup Menu - Mitsubishi WD-60C8 Owner's Manual

Setup Menu

Use the Setup menu to:
• Select English or Spanish for menus and on-screen
text.
• Scan the channels available for the antenna or cable
service connected to the ANT 1 or ANT 2 jacks.
• Edit channel options, including channel locking.
• Set the TV's internal clock.
• Set the TV Timer to turn on the TV automatically at
a designated time.
• Set the energy mode for power consumption when
the TV is powered off.
• Set the TV Lamp Mode.
• Turn 3D mode on and off.
Setup Menu Options
English
Spanish
Language
Ant-1 Air
Ant-1 Cable
Scan
Ant-2 Air
Ant-2 Cable
Notes on Scan and channel memorization:
• Channel memorization may take up to 15 minutes
to complete.
• To stop channel memorization before completion,
press CANCEL.
• When watching TV, press CH
memorized channels.
• To add a digital channel that does not appear in
the Edit menu without repeating channel memori-
zation:
1. Look up the physical channel number
for the new digital channel. The website
www.antennaweb.org can help you find the
physical channel number.
2. Tune to any channel on the ANT 1 or ANT 2
input your antenna is connected to.
Setup menu, Scan option
Display on-screen menus in either English or Spanish.
Note: To listen to audio in other languages (when available), see the section
on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog
signal) or Language (digital signal).
Scan memorizes broadcast channels to make them easier to find. To start
channel memorization:
1. Highlight one of the input selections based on your connection to ANT 1
or ANT 2:
• Air when connected to an indoor or outdoor antenna.
• Cable when connected to direct cable (no cable box)
2. Press to highlight START.
3. Press ENTER to start channel memorization for the selected input.
to move through
•
5. TV Menus
3. Use the number keys and
CANCEL key to enter the physical channel
number followed by "-1" and ENTER. For
example, for physical channel 36, press
—
3 6 CANCEL
The TV will search for a digital channel on the
channel 36 frequency. When it finds the channel,
it will:
a. Add the channel to memory.
b. Change the channel number to the virtual
channel number sent by the broadcaster.
c. Add to memory any associated sub-
channels.
Rememorize channels if you move the TV to a
different geographic area with a different channel
line-up.
43
ENTER.
1