Table of Contents
Advertisement
NOTE:
When you connect a computer to this monitor, attach
the supplied ferrite cores. If you do not do this, this
monitor will not conform to mandatory FCC standards.
Attaching the ferrite cores:
Set the ferrite cores on both ends of the
MONITORLINK™ cable (not supplied), and both ends
of the power cable (supplied).
Close the lid tightly until the clamps click.
Use the band to fasten the ferrite core (supplied) to the
MONITORLINK cable.
MONITORLINK cable (not supplied)
band
core (small)
Power cable (supplied)
core (large)
To avoid damage and prolong operating life:
1. Use only with 120V 50/60Hz AC power supply.
Continued operation at line voltages greater than 120
Volts AC will shorten the life of the unit, and might
even cause a fire hazard.
2. Handle the unit carefully when handling and installing
it and do not drop.
3. Set the unit away from heat, excessive dust, and direct
sunlight.
4. Protect the inside of the unit from liquids and small
metal objects. In case of accident, unplug the unit and
have it serviced by an authorized Mitsubishi Service
Center.
5. Do not hit or scratch the panel surface as this causes
flaws on the surface of the screen.
6. For correct installation and mounting it is strongly
recommended to use a trained, authorized Mitsubishi
dealer.
7. Only use tabletop stands or wall-mount brackets that
are designed specifically for this product.
8. As is the case with any phosphor-based display (like a
CRT monitor, for example) light output will gradually
decrease over the life of a Plasma Display Panel.
Connector r
band
core (small)
core (large)
Recommendations to avoid or minimize uneven phosphor
aging:
Like all phosphor-based display devices and all other gas
plasma displays, plasma monitors can be susceptible to
uneven phosphor aging under certain circumstances.
Certain operating conditions, such as the continuous
display of a static image over a prolonged period of time,
can result in uneven phosphor aging if proper precautions
are not taken. To protect your investment in this Mitsubishi
plasma monitor, please adhere to the following guidelines
and recommendations for minimizing this type of damage:
* Always enable and use your computer's video game or DVD
player screen saver during use with these sources.
* Display a moving image whenever possible.
* Change the position of the menu display from time to time.
* Always power down the monitor when you are finished using it.
If the plasma monitor is in long term use or continuous
operation, take the following measures to reduce the
likelihood of uneven phosphor aging:
* Lower the Brightness and Contrast levels as much as possible
without impairing image readability.
* Display an image with many colors and color gradations (i.e.
photographic or photo-realistic images).
* Create image content with minimal contrast between light and
dark areas. Use complementary or pastel colors whenever
possible.
* Avoid displaying images with few colors and distinct, sharply
defined borders between colors.
Contact Mitsubishi at 1-800-332-2110 for other
recommended procedures that will best suit your particular
application needs.
Advertisement
Table of Contents
