Setting The Color Temperature - Mitsubishi PD-5010 Owner's Manual

Setting the color temperature

Use this procedure to set color tone produced by the
plasma display.
Example: Setting "LOW"
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and
SETTINGS", then press the MENU/ENTER button.
The "VIDEO SETTINGS" screen appears.
2. Use the and buttons to select "COLOR TEMP.".
V I D E O S E T T I N G S
CONTRAST CONTRAST
BRIGHTNESS BRIGHTNESS
SHARPNESS SHARPNESS
COLOR COLOR
TINT TINT
PICTURE MODE PICTURE MODE
COLOR TEMP. COLOR TEMP.
NR NR
SEL. ADJ.
3. Use the and buttons to select "LOW".
The mode switches as follows when the
buttons are pressed:
HIGH MEDIUM
* See page 23 to set "CUSTOM".
COLOR TEMP.
* If neither the or button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
buttons to select "VIDEO
R G
: MEMORY
: MEDIUM
: OFF
EXIT RETURN
and
LOW CUSTOM
:
LOW
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
Setting the color temperature
HIGH .............. Whites appear more bluish
MEDIUM ........... Standard
LOW ............... Whites appear more reddish
Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select "FUNCTION," and then select
"RESET". Note that this also restores other settings to
the factory defaults.
22