Rear View/ Terminal Board - Mitsubishi PD-5010 Owner's Manual

Rear View/ Terminal Board

A EXT SPEAKER L and R
Connect speakers here. Maintain the correct polarity.
B VIDEO 1, 2, 3
Connect a VCR or other video device here. Only one
of these three inputs can be used.
C DVD1 / HD1
Connect DVD's, High Definition or Laser Discs, etc.
here.
D RGB1
Inputs the analog RGB signal of personal computer,
etc.
E RGB2/ DVD2/ HD2
RGB2: Inputs the analog RGB signal.
DVD2/ HD2: Connect DVD's, High Definition or
Laser Discs, etc. here.
F MONITORLINK TM (M-LINK) INPUT
A proprietary input for connecting a Mitsubishi tuner/
controller. Input will appear in menus only after the
proprietary tuner/controller has been connected.
G CONTROL LOCK
When "CONTROL LOCK" is set "ON", the buttons
on the set's control panel do not function.
H REMOTE CONTROL
Connect the supplied remote cable here.
I MONITORLINK TM CONTROL
This terminal can be used for external control of power
ON/OFF, input selection AUDIO MUTE and other
features. It is also used with a proprietary Mitsubishi
tuner/controller.
J AUDIO1 / AUDIO2 / AUDIO3
Audio 1: Connect the audio output from the
device connected to Video 1, 2 or 3.
Audio 2: Connect the audio output from the
device connected to DVD1/HD1.
Audio 3: Connect the audio output from the
device connected to RGB2/DVD2/HD2.
K AC IN
Connect the included power cord here.
4