Operations In The Picture-In-Picture Mode; Selecting The Input Signals To Be Displayed; Adjusting The On-Screen Menu Controls - Mitsubishi PD-5010 Owner's Manual

Operations in the Picture-in-picture mode

To move the position of the sub screen, press the cursor
or button.
VIDEO1
A
button
VIDEO1
To change the size of the sub screen, press the ZOOM
button.
VIDEO1 RGB/PC1
B
A
VIDEO1
ZOOM—
B
button
A
ZOOM+
VIDEO1
button
ZOOM—
button
ZOOM+
button
ZOOM—
button
To make the desired picture active, press the SELECT
button.
VIDEO1
A
VIDEO1
A
RGB/PC1
B
button
RGB/PC1
B
A
RGB/PC1
RGB/PC1
B
A
VIDEO1 RGB/PC1
B
A
ZOOM+
button
RGB/PC1
B
SELECT button
RGB/PC1
B

Selecting the input signals to be displayed

1. Press the SELECT button to make the desired picture
active.
2. Press the RGB/PC, VIDEO, or DVD/HD button.
Each press of the button changes the selection of the
input signal.
The INPUT button on the monitor can also be used to
change the selection.

Adjusting the ON-SCREEN MENU controls

1. Press the SELECT button to make the desired picture
active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see "On Screen Menu Controls" on page
18.
Note:
• During Multi screen mode, Auto Adjust does not affect
the screen.
• During Multi screen mode, some functions of the MENU
controls are not available.
17