Table of Contents
Advertisement
1450_book_1ATT 3/26
On steadily:
handset is charging in base
Flashing slowly:
handset or base speaker is in use or a call is on hold
Flashing quickly:
there is an incoming call
Hold
Press H to put a call on hold. The IN USE light flashes. To return to
the call, press K.
NOTE: When Hold is active, pressing P on handset will also return
you to the call
Mute
Press M to prevent your caller from hearing you (you can hear your caller).
Press again to deactivate. MUTE light is on when Mute is activated.
3/26/02
4:59 PM
Page 9
TELEPHONE OPERATION
Redial
Press to call the last number dialed at
the base (up to 32 digits).
.
AT THE BASE
Flashes when
you have
unreviewed call
information.
Flash
Access subscriber
services while
on a call.
Speaker
Volume
While on a call,
use to adjust the
volume of what
you hear.
Make, Answer,
or End a Call
Press K.
When calling, use
the base keypad to
dial or enter a
memory location.
SPEAKER light is
on when call is
connected.
9
Advertisement
Table of Contents
