Quick reference guide FLASH During a call, press to receive When the telephone is idle, an incoming call if call waiting is press to display caller ID activated. information. While entering numbers, press DISPLAY DIAL twice to insert a three-second dialing pause.
Telephone base installation Install the telephone as shown below. Choose a location where the telephone is not exposed to excessive heat, cold, dust or moisture. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack.
Getting started Installation options NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions. Wall mount Tabletop mount Telephone outlet mounting plate with mounting studs. Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required.
Installation options 3. Connect the telephone line cord and power adapter to the jacks on the back of the telephone base. Bundle the telephone line cord, and secure it with a twist tie before placing it inside the bracket. Please see the picture on the right.