Auto Answer - Yealink SIP-T22P User Manual

2. Press
3. Press
You can use auto answer to automatically answer an incoming call.
To enable auto answer via web user interface:
1. Click on Account->Basic.
2. Select Enabled from the pull-down list of Auto Answer.
3. Click Confirm to accept the change.
The icon appears on the LCD screen.
Note
Auto answer is configurable via web user interface only.
Auto answer is only applicable when there is no other call in progress on the phone.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there is
an active call on the phone. You can also enable or disable the phone to play a warning
tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Features->Call Waiting.
or to select the desired entry from the placed call list.
or the Call soft key.
Basic Call Features
41