Phone Lock - Yealink SIP-T22P User Manual

User Guide for the SIP-T22P/SIP-T22 IP Phone
2. Press
field, or select Disable to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
You can enable or disable the phone lock feature in Lync server and you can lock the
phone or set the unlock PIN via phone user interface.
If phone lock feature is enabled in Lync server, you should set the unlock PIN before
login to the phone.
To set unlock PIN:
1. Enter the unlock Pin (length must be between 6 and 15) in the New PIN field.
2. Enter the unlock pin again in the Confirm PIN field.
3. Press the Save soft key.
Note
When configuring the unlock pin, incoming calls will be ignored and saved to the history.
When the unlock Pin is configured successfully, you can do one of the following to lock
your phone.
Long press
-
idle.
Press Menu ->Settings->Basic Setting->Phone Lock.
-
Select Lock the phone, and then press the OK soft key.
The phone will be locked automatically when it has been inactive after the
-
specified time (in seconds). The time is configurable on Lync server only.
22
or , or the Switch soft key to select # or * from the "*"or "#"as send
two seconds to lock the keypad immediately when the phone is