Call Park - Yealink SIP-T22P User Manual

User Guide for the SIP-T22P/SIP-T22 IP Phone
5. Press the Conf soft key to join all parties in the conference.
During the conference call, you can do one of the following:
Press the Hold soft key to place the conference call on hold.
-
Press the Split soft key to split the conference call into two individual calls on hold.
-
You can press
key to retrieve the desired call.
Press the Transfer soft key to transfer the call to the other two parties.
-
The conference initiator releases from the conference call, and the other two
parties remain connected.
Press the Cancel soft key to drop the conference call.
You can use call park feature to place a call on hold, and then retrieve the call later or
from another phone in the system (for example, a phone in another office or conference
room). You can park an active call by pressing the Park soft key on the phone. If the call
is parked successfully, a visible prompt will be displayed on the LCD screen of each
party confirming that the call was parked.
The phone performing call park feature can retrieve directly or retrieve the parked call
in another place by calling the call park retrieve code.
To use call park:
1. User on phone A is during a call with user on phone B.
2. User on phone A wants to deal with some things or take the call in a conference
room for privacy, then presses the More soft key, and then presses the Park soft key
on phone A.
The LCD screen of phone A displays the call park retrieve code.
56
or to switch between calls, and then press the Resume soft